REAR DOOR SPEAKER REMOVAL


  1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG


    1. A003YVN

      Using a moulding remover, disengage the 3 claws and remove the rear door inside handle bezel plug as shown in the illustration.

  2. REMOVE REAR DOOR REAR FRAME BRACKET


    1. A003WT2

      Disengage the clip, 3 claws and 3 guides and remove the rear door rear frame bracket.

  3. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    1. A003X74

      Using a moulding remover, disengage the 3 clips, 4 claws and 2 guides as shown in the illustration.

    2. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.

  4. REMOVE REAR DOOR ARMREST COVER


    1. A003WKN

      Remove the rear door armrest cover.

  5. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. A003WA9E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear door panel.

    2. A003VT0

      Remove the 2 screws.

    3. Using a clip remover, disengage the 9 clips.

    4. A003XWL

      Pull out the rear door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.

    5. Raise the rear door trim board sub-assembly to remove the rear door trim board sub-assembly together with the rear door inner glass weatherstrip.

    6. Disconnect the connector.

    7. A003ZHN

      Disconnect the rear door lock remote control cable assembly and rear door inside locking cable assembly.

    8. Remove the rear door trim board clip (blue) from the rear door trim board.

  6. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP


    1. A003ZV5E01
      Text in Illustration
      *1 Screwdriver

      Using a screwdriver, disengage the 3 claws and remove the rear door inner glass weatherstrip from the rear door trim board sub-assembly as shown in the illustration.

  7. REMOVE REAR SPEAKER ASSEMBLY


    1. A003V5U

      Disconnect the connector.

    2. Remove the 3 bolts and rear speaker assembly.

      Note

      Do not touch the speaker cone.