AUDIO AND VISUAL SYSTEM (w/o Navigation System) CD Sound Skips

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK CD

   
   
   1. 

      Check that the CD is not deformed or cracked.

      OK
      No deformation or cracks on the CD

   
   
   • OKClick here
   • NGClick here
2. Click here

   CHECK CD

   
   
   1. 

      Check the CD.

      OK
      The CD is clean.

      Tip:

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      Note:

      Do not use a conventional record cleaner or anti-static preservative.

   
   
   • OKClick here
   • NGClick here
3. Click here

   CHECK OPERATION

   
   

   1. Check if the problem recurs using a known good CD.

      OK
      Malfunction disappears.

   
   
   • OKClick here
   • NGClick here
4. Click here

   CHECK RADIO RECEIVER ASSEMBLY

   
   

   1. Check the radio receiver assembly installation condition.

      
      

      1. Check that the radio receiver assembly is properly installed.

         OK
         Radio receiver assembly is properly installed.

   
   
   • OKClick here
   • NGClick here
5. Click here

   CLEAN CD

6. Click here

   CHANGE DISC

7. Click here

   REPLACE RADIO RECEIVER ASSEMBLYClick here

8. Click here

   REINSTALL RADIO RECEIVER ASSEMBLY PROPERLY

9. Click here

   END