STEERING HEATER SWITCH INSTALLATION


  1. INSTALL STEERING HEATER SWITCH


    1. Engage the 2 claws to install the steering heater switch to the lower instrument panel finish panel sub-assembly.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. A003XF4

      Engage the 8 claws and clip to install the lower instrument panel finish panel sub-assembly.

  3. INSTALL INSTRUMENT SIDE PANEL


    1. A003Y0E

      Engage the 4 guides, clip and 3 claws to install the instrument side panel LH.

  4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. A003Y6FE01
      Text in Illustration
      *a Alignment Mark (Orange)

      Align the alignment mark (orange) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.

      Note

      After installation, check that the corners fit correctly.