HEATED STEERING WHEEL CONTROLLER REMOVAL

Note


  • Do not replace the spiral cable with the auxiliary battery connected and the power switch on (IG).

  • Do not rotate the spiral cable without the steering wheel with the auxiliary battery connected and the power switch on (IG).

  • Ensure that the steering wheel is installed and aligned straight when inspecting the steering sensor.

  • Do not remove the steering sensor from the spiral cable.


  1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE HORN BUTTON ASSEMBLY

    Click here

  3. REMOVE STEERING WHEEL ASSEMBLY


    1. A003Z6ZE01
      Text in Illustration
      *a Matchmark

      Remove the steering wheel assembly set nut.

    2. Put matchmarks on the steering wheel assembly and steering main shaft.

    3. Disconnect the connectors from the spiral cable and steering wheel assembly.

    4. A003X3RE01
      Text in Illustration
      *a Turn
      *b Hold

      Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09955-04071 )

      Note

      Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.

  4. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. A003X21E01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Disconnect the steering pad switch connector from the spiral cable.

    2. Remove the clamp.

    3. Remove the wire harness from the guide.

    4. A003YC2E01
      Text in Illustration
      *1 Pin
      *2 Guide

      Remove the 2 screws.

    5. Disengage the 2 claws, 2 pins and 2 guides to remove the steering pad switch assembly.

  5. REMOVE CRUISE CONTROL SWITCH (w/ Cruise Control System)


    1. A003XFI

      Remove the 2 screws.

    2. A003XSQ

      Disconnect the connector and remove the cruise control switch.

  6. REMOVE CRUISE CONTROL SWITCH WIRE (w/ Cruise Control System)


    1. Remove the cruise control switch wire.

  7. REMOVE STEERING SHAKE DAMPER


    1. A003YJT

      Remove the 2 screws and steering shake damper from the steering wheel sub-assembly.

  8. REMOVE LOWER STEERING WHEEL BOSS COVER


    1. A003V9J

      Remove the 2 screws.

    2. A003ZVL

      Disengage the 4 claws to remove the lower steering wheel boss cover from the steering wheel sub-assembly.

    3. A003YRW

      Disconnect the connector from the steering wheel heater control assembly.

  9. REMOVE STEERING WHEEL HEATER CONTROL ASSEMBLY


    1. A003ZWM

      Disengage the clamp.

    2. Remove the 2 screws and steering wheel heater control assembly from the lower steering wheel boss cover.