STEERING PAD SWITCH INSTALLATION


  1. INSTALL STEERING PAD SWITCH ASSEMBLY


    1. Engage the 2 claws, 2 pins and 2 guides to install the steering pad switch assembly.

    2. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }
    3. A003X21E01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Install the clamp.

    4. Pass the wire harness through the guide.

    5. Connect the steering pad switch connector to the spiral cable.

    6. A003W0M

      Pass the wire harness over the 2 guides.

  2. INSTALL HORN BUTTON ASSEMBLY

    Click here