STEERING COLUMN ASSEMBLY INSPECTION


  1. INSPECT PRELOAD


    1. A003W70E01
      Text in Illustration
      *a Wooden Block
      *b Piece of Cloth

      Secure the steering column assembly in a vice using aluminum plates and a piece of cloth.

      Note


      • Do not overtighten the vice, as the steering column assembly may become deformed.

      • Support the steering column assembly with a wooden block or similar item to ensure that it does not fall.

    2. A003ZK8E01

      Using SST, turn the main shaft and measure the preload.

      SST
      09616-00011
      Torque:
      Preload
      0.91 to 1.45 N*m  { 10 to 14 kgf*cm, 8 to 12 in.*lbf }

      If the preload is not as specified, replace the steering column assembly with a new one.

  2. INSPECT STEERING COLUMN ASSEMBLY


    1. Inspect the bushings.


      1. A003ZIVE01
        Text in Illustration
        *1 Bushing

        Check that the 2 bushings are securely installed to the steering column assembly.

        If the 2 bushings are installed improperly, replace the steering column assembly with a new one.

      2. Check the 2 bushings for deformation and damage.

        If the bushings are deformed or damaged, replace the steering column assembly with a new one.

    2. Inspect the capsules.


      1. A003Z7UE01
        Text in Illustration
        *1 Capsule

        Check that the 2 capsules are securely installed to the steering column assembly as shown in the illustration.

        Standard Dimension
        A B
        2 mm (0.0787 in.) 17 mm (0.669 in.)

        If the capsules are not positioned as specified, replace the steering column assembly with a new one.

      2. Check the 2 capsules for deformation and damage.

        If either of the capsules is deformed, loose, missing or damaged, replace the steering column assembly with a new one.