PARKING BRAKE CABLE INSTALLATION


  1. INSTALL NO. 2 PARKING BRAKE CABLE CLAMP


    1. A003VI8

      Engage the 2 claws to install a new No. 2 parking brake cable clamp to the No. 3 parking brake cable assembly.

  2. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. Install the No. 3 parking brake cable assembly with the 5 bolts.

      A003Z08
      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
    2. A003Z7EE01
      Text in Illustration
      *1 No. 3 Parking Brake Cable Assembly
      *2 Clip

      Install the No. 3 parking brake cable assembly to the rear disc brake cylinder assembly.

      Tech Tips

      Be sure to engage the No. 3 parking brake cable assembly clip onto the rear disc brake cylinder assembly as shown in the illustration.

    3. A003WLP

      Connect the No. 3 parking brake cable assembly to the rear disc brake cylinder assembly.

    4. A003VKT

      Engage the clamp to install the No. 2 parking brake cable clamp.

  3. INSTALL PARKING BRAKE LEVER PROTECTOR


    1. A003VOHE02

      Install the parking brake lever protector to the No. 3 parking brake cable assembly.

  4. INSTALL REAR FLOOR SIDE MEMBER COVER (w/ Floor Under Cover)


    1. for LH Side:

      Tech Tips

      Perform the following procedure when installing the No. 3 parking brake cable assembly.


      1. Install the rear floor side member cover LH with the 2 bolts, nut and 2 clips.

    2. for RH Side:

      Tech Tips

      Perform the following procedure when installing the No. 2 parking brake cable assembly.


      1. Install the rear floor side member cover RH with the bolt, nut and 2 clips.

  5. INSTALL FRONT NO. 2 FLOOR HEAT INSULATOR


    1. A003Y1K

      Install the front No. 2 floor heat insulator with the 3 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  6. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here

  7. INSTALL NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY


    1. A003VXSE01
      Text in Illustration
      *1 No. 1 Parking Brake Pull Rod Sub-assembly
      *2 No. 2 Parking Brake Cable Assembly
      *3 No. 3 Parking Brake Cable Assembly

      Connect the No. 3 parking brake cable assembly to the No. 1 parking brake pull rod sub-assembly as shown in the illustration.

    2. Connect the No. 2 parking brake cable assembly to the No. 1 parking brake pull rod sub-assembly.

      Tech Tips

      Perform the same procedure as for the No. 3 parking brake cable assembly.

  8. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)


    1. Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.

    2. A003WUC

      Install the clip to the No. 1 parking brake cable assembly.

    3. A003Z2E

      Bend the parking brake pedal claw.

    4. A003WWF

      Temporarily install the adjusting nut.

  9. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)


    1. Pass the No. 1 parking brake cable assembly through the parking brake pedal assembly.

    2. A003V2J

      Install the clip to the No. 1 parking brake cable assembly.

    3. A003YAA

      Bend the parking brake pedal claw.

    4. A003XJH

      Temporarily install the adjusting nut.

  10. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)

    Click here

  11. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)

    Click here

  12. INSTALL REAR WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }