PARKING BRAKE CABLE REMOVAL

Tech Tips


  • The following procedure is for the No. 1 parking brake cable assembly and No. 3 parking brake cable assembly.

  • Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.


  1. REMOVE REAR WHEEL

  2. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)

    Click here

  3. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)

    Click here

  4. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)


    1. A003WWF

      Remove the adjusting nut.

    2. A003Y4Y

      Pull up the parking brake pedal claw.

    3. A003WUC

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  5. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)


    1. A003XJH

      Remove the adjusting nut.

    2. A003ZKS

      Pull up the parking brake pedal claw.

    3. A003V2J

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  6. REMOVE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY


    1. A003X51E01
      Text in Illustration
      *1 No. 1 Parking Brake Pull Rod Sub-assembly
      *2 No. 2 Parking Brake Cable Assembly
      *3 No. 3 Parking Brake Cable Assembly

      Separate the No. 3 parking brake cable assembly from the No. 1 parking brake pull rod sub-assembly as shown in the illustration.

    2. Separate the No. 2 parking brake cable assembly to remove the No. 1 parking brake pull rod sub-assembly.

      Tech Tips

      Perform the same procedure as for the No. 3 parking brake cable assembly.

  7. REMOVE FRONT EXHAUST PIPE ASSEMBLY


  8. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. A003Y1K

      Remove the 3 nuts and front No. 2 floor heat insulator.

  9. REMOVE REAR FLOOR SIDE MEMBER COVER (w/ Floor Under Cover)


    1. for LH Side:

      Tech Tips

      Perform the following procedure when removing the No. 3 parking brake cable assembly.


      1. A003WZU

        Remove the 2 bolts, nut and clip.

      2. Disengage the clip and remove the rear floor side member cover LH.

    2. for RH Side:

      Tech Tips

      Perform the following procedure when removing the No. 2 parking brake cable assembly.


      1. A003Y2E

        Remove the bolt and nut.

      2. Disengage the 2 clips and remove the rear floor side member cover RH.

  10. REMOVE PARKING BRAKE LEVER PROTECTOR


    1. A003VOHE01

      Remove the parking brake lever protector from the No. 3 parking brake cable assembly.

  11. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A003VKT

      Disengage the clamp to separate the No. 2 parking brake cable clamp.

    2. A003VQP

      Separate the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

    3. A003XAKE01
      Text in Illustration
      *1 No. 3 Parking Brake Cable Assembly
      *2 Clip
      *3 Offset Wrench (14 mm)

      Disconnect the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

      Tech Tips

      Insert an offset wrench (14 mm) at the base of the No. 3 parking brake cable assembly as shown in the illustration to disengage the clip. Pull out the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

    4. Remove the 5 bolts and No. 3 parking brake cable assembly.

      A003Z08

  12. REMOVE NO. 2 PARKING BRAKE CABLE CLAMP


    1. A003VF9

      Disengage the 2 claws to remove the No. 2 parking brake cable clamp from the No. 3 parking brake cable assembly.