FRONT BRAKE DISASSEMBLY


  1. REMOVE CYLINDER BOOT


    1. A003Z3WE01
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the set ring and cylinder boot from the disc brake cylinder assembly.

      Note

      Be careful not to damage the brake piston or cylinder.

  2. REMOVE FRONT DISC BRAKE PISTON


    1. A003ZFE

      Place a piece of cloth between the front disc brake piston and disc brake cylinder assembly.

    2. Apply compressed air to remove the front disc brake piston from the disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the piston when using compressed air.

      Note

      Do not allow any brake fluid to spatter.

  3. REMOVE PISTON SEAL


    1. A003XWBE06
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the disc brake cylinder assembly.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

  4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG