BRAKE PEDAL (for LHD) REMOVAL


  1. REMOVE POWER STEERING ECU ASSEMBLY

    Click here

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  3. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY


    1. A003Y7L

      Disconnect the connector from the brake pedal stroke sensor assembly.

    2. A003YZE

      Remove the 2 nuts and brake pedal stroke sensor assembly from the brake pedal support assembly.

      Note


      • Do not drop the brake pedal stroke sensor assembly.

      • If the brake pedal stroke sensor assembly has been dropped, replace the brake pedal stroke sensor assembly with a new one.

  4. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. A003X5G

      Disconnect the connector.

    2. A003XB7

      Turn the stop light switch assembly counterclockwise and remove it.

  5. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  6. REMOVE BRAKE PEDAL RETURN SPRING


    1. A003X04

      Remove the brake pedal return spring from the brake pedal support assembly and push rod pin.

  7. REMOVE PUSH ROD PIN


    1. A003XJP

      Remove the clip and push rod pin to separate the brake pedal sub-assembly from the push rod clevis.

  8. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A003YEX

      Remove the bolt and separate the brake pedal support assembly from the instrument panel reinforcement.

    2. A003ZRK

      Disengage the clamp.

    3. A003V9V

      Remove the 4 nuts and brake pedal support assembly.

    4. A003Y07

      Remove the nut from the brake pedal support assembly.

  9. REMOVE BRAKE PEDAL PAD