TIRE AND WHEEL SYSTEM INSPECTION


  1. INSPECT TIRES


    1. Check the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure
      Area Tire Size For driving under 160 km/h (100 mph) For driving at over 160 km/h (100 mph)

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)

      Europe

      (Countries that use WVTA)

      		 195/65R15 91H

      230 (2.3, 33)*1

      270 (2.7 ,39)*2

      		 250 (2.5, 36)
      205/55R16 91V 220 (2.2, 32) 240 (2.4, 35)
      215/45R17 87W 230 (2.3, 33) 220 (2.2, 32) 230 (2.3, 33) 220 (2.2, 32)

      Europe

      (Countries that do not use WVTA)

      		 195/65R15 91H 230 (2.3, 33) 250 (2.5, 36)
      205/55R16 91V 220 (2.2, 32) 240 (2.4, 35)
      215/45R17 87W 230 (2.3, 33) 220 (2.2, 32) 230 (2.3, 33) 220 (2.2, 32)
      GCC 205/55R16 91V 220 (2.2, 32) 240 (2.4, 35)

      *1: Standard Pressure

      *2: ECO Pressure

    2. A003YPS

      Using a dial indicator, check the runout of the tires.

      Maximum tire runout
      1.4 mm (0.0551 in.)

  2. ROTATE TIRES


    1. A003VG0

      Rotate the tires as shown in the illustration.

      Text in Illustration
      A003ZV9 Front

  3. INSPECT AND ADJUST WHEEL BALANCE


    1. A003XCFE06

      Inspect and adjust the off-the-car balance.

      Maximum imbalance
      8.0 g (0.0176 lb)

      Note


      • Use a cleaning detergent to remove dirt, oil and water from the surface where the balance weight is to be adhered.

      • Do not touch the adhesive surface of the tape.

      • Adhere a sticking type balance weight to the flat surface (A) shown in the illustration.

        Width (A)
        25 mm (0.984 in.)

      • Push the balance weight securely with your finger to adhere it to the desired position.

      • Do not reuse balance weights.

      Tech Tips

      The inner side balance weight should be installed by clipping it to the rim.

  4. INSPECT FRONT AXLE HUB BEARING LOOSENESS

    Click here

  5. INSPECT REAR AXLE HUB BEARING LOOSENESS

    Click here

  6. INSPECT FRONT AXLE HUB RUNOUT

    Click here

  7. INSPECT REAR AXLE HUB RUNOUT

    Click here