FRONT STABILIZER BAR REMOVAL


  1. REMOVE FRONT WHEELS

  2. REMOVE NO. 1 ENGINE UNDER COVER

  3. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A003V88E02
      Text in Illustration
      *a Upper Side
      *b Lower Side

      Remove the 2 nuts and front stabilizer link assembly LH.

      Tech Tips

      If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

  4. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  5. SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH


    1. A003Z94

      Remove the bolt and 2 nuts, and separate the front lower No. 1 suspension arm sub-assembly from the front lower ball joint assembly.

  6. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH


    1. A003YHJ

      Remove the 2 bolts, nut, and front lower No. 1 suspension arm sub-assembly LH from the front suspension crossmember sub-assembly.

      Note

      Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.

  7. REMOVE FRONT SUSPENSION MEMBER BRACE


    1. A003XE7

      Remove the 8 bolts and front suspension member brace from the front suspension crossmember sub-assembly.

  8. REMOVE FRONT STABILIZER BAR


    1. A003WMA

      Remove the front stabilizer bar with 2 front stabilizer bar bushings from the front suspension crossmember sub-assembly.

  9. REMOVE FRONT STABILIZER BAR BUSHING LH


    1. A003X27

      Remove the front stabilizer bar bushing LH from the front stabilizer bar.

  10. REMOVE FRONT STABILIZER BAR BUSHING RH

    Tech Tips

    Perform the same procedure as for the LH side.