FRONT LOWER BALL JOINT INSTALLATION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT LOWER BALL JOINT ASSEMBLY


    1. Secure the front axle assembly in a vise.

      Note

      When using a vise, do not overtighten it.

    2. Install the front lower ball joint assembly to the front axle assembly with the nut.

      Torque:
      71 N*m  { 724 kgf*cm, 52 ft.*lbf }

    3. Install a new clip.

      Note

      Further tighten the nut up to 60° if the holes for the clip are not aligned.

  2. INSTALL FRONT AXLE ASSEMBLY

    Click here