PERFORMANCE DAMPER REMOVAL


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)


    1. A003VJD

      Disengage the 2 claws and remove the No. 1 heater air duct splash shield seal.

  3. REMOVE NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)


    1. A003Z14

      Disengage the 2 claws and remove the No. 1 heater air duct splash shield seal.

  4. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)


    1. A003Y4M

      Disengage the claw and guide, and remove the No. 2 heater air duct splash shield seal.

  5. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)


    1. A003WN3

      Disengage the claw and guide, and remove the No. 2 heater air duct splash shield seal.

  6. REMOVE COWL BODY MOUNTING REINFORCEMENT LH (for LHD)


    1. A003WMR

      Remove the 2 bolts and cowl body mounting reinforcement LH.

  7. REMOVE COWL BODY MOUNTING REINFORCEMENT RH (for RHD)


    1. A003YWK

      Remove the 2 bolts and cowl body mounting reinforcement RH.

  8. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)


    1. A003W0I

      Disengage the clamp and separate the wire harness.

    2. A003WSZ

      w/ Wiper Deicer:

      Disengage the 3 clamps, disconnect the connector and separate the wire harness.

    3. A003YRF

      Remove the 9 bolts and outer cowl top panel sub-assembly.

  9. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)


    1. A003X05

      Disengage the clamp and separate the wire harness.

    2. A003X62

      w/ Wiper Deicer:

      Disengage the 3 clamps, disconnect the connector and separate the wire harness.

    3. A003ZGV

      Remove the 9 bolts and outer cowl top panel sub-assembly.

  10. REMOVE SUSPENSION TOWER DAMPER


    1. A003VPIE01
      Text in Illustration
      *a LH Side
      *b RH Side

      Remove the 2 nuts and the suspension tower damper from the vehicle.