INPUT SHAFT OIL SEAL REPLACEMENT


  1. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE INPUT SHAFT TYPE T OIL SEAL


    1. A003VK6E01
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip taped, remove the oil seal.

      Note

      When removing the oil seal, make sure not to damage the input shaft or hybrid vehicle transaxle housing.

  3. INSTALL INPUT SHAFT TYPE T OIL SEAL


    1. A003YP5E01

      Coat the lip of a new oil seal with MP grease.

    2. Using SST and a hammer, tap in the oil seal.

      SST
      09330-50010
      Oil seal installation depth
      1.0 to 1.8 mm (0.0394 to 0.0709 in.)

      Note


      • Ensure that no foreign matter adheres to the oil seal lip.

      • Ensure that the oil seal is not at an angle.

  4. INSTALL HYBRID VEHICLE TRANSAXLE ASSEMBLY

    Click here