Click here

INPUT SHAFT OIL SEAL REPLACEMENT

Click here
Click here Click here
  1. Click here

    REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY

    (Click here)

  2. Click here

    REMOVE INPUT SHAFT TYPE T OIL SEAL


    1. A003VK6E01

      Using a screwdriver with its tip taped, remove the oil seal.

      Table 1. Text in Illustration
      *1 Vinyl Tape
      Note:

      When removing the oil seal, make sure not to damage the input shaft or hybrid vehicle transaxle housing.

  3. Click here

    INSTALL INPUT SHAFT TYPE T OIL SEAL


    1. A003YP5E01

      Coat the lip of a new oil seal with MP grease.

    2. Using SST and a hammer, tap in the oil seal.

      09330-50010
      Oil seal installation depth
      1.0 to 1.8 mm (0.0394 to 0.0709 in.)
      Note:

      • Ensure that no foreign matter adheres to the oil seal lip.

      • Ensure that the oil seal is not at an angle.

  4. Click here

    INSTALL HYBRID VEHICLE TRANSAXLE ASSEMBLY

    (Click here)