ROCKER PANEL MOULDING REMOVAL


  1. REMOVE REAR WHEEL HOUSE FRONT PLATE


    1. A003VYC

      Remove the 2 clips.

    2. Remove the screw and remove the rear wheel house front plate.

  2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY


    1. A003VRDE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the body rocker panel moulding assembly.

    2. A003V2B

      Using a 4 mm hexagon wrench, remove the 3 hexagon screws.

    3. A003WC1

      Remove the grommet.

    4. A003Z1QE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws and remove the rocker panel moulding cover.

      Tech Tips

      Use the same procedure for the front side and rear side.

    5. A003X1L

      Using a 4 mm hexagon wrench, remove the hexagon screw.

    6. A003XOW

      Remove the 2 screws.

    7. A003WWE

      Remove the 3 clips (side mudguard retainers).

    8. Remove the 4 clips (No. 2 side mudguard retainers).

    9. A003YZY

      Disengage the 9 clips to remove the body rocker panel moulding assembly.

    10. Remove the 9 clips (rocker panel moulding clips) as shown in the illustration.

      A003YYX