TURN SIGNAL FLASHER ASSEMBLY REMOVAL


  1. REMOVE POWER STEERING ECU ASSEMBLY (for LHD)

    Click here

  2. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY (for RHD)

    Tech Tips

    Use the same procedure for the RH side and LH side Click here.

  3. REMOVE TURN SIGNAL FLASHER ASSEMBLY (for LHD)


    1. A003V86

      Remove the bolt.

    2. Disengage the pin and disconnect the connector holder.

    3. A003XTH

      Using a screwdriver, disconnect the connector and remove the turn signal flasher assembly.

  4. REMOVE TURN SIGNAL FLASHER ASSEMBLY (for RHD)


    1. A003YGD

      Using a screwdriver, disconnect the connector and remove the turn signal flasher assembly.