HEIGHT CONTROL SENSOR INSTALLATION


  1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY


    1. Engage the 2 guides and install the rear height control sensor sub-assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the connector.

    3. Engage the clamp.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE


    1. Engage the 4 claws and 2 guides to install the rear floor board upper No. 3 plate.

  4. INSTALL DECK FLOOR BOX RH


    1. Engage the 6 guides.

    2. Install the deck floor box RH with the clip.

  5. INSTALL REAR NO. 3 FLOOR BOARD


    1. Install the rear No. 3 floor board.

  6. INSTALL REAR DECK FLOOR BOX


    1. Install the rear deck floor box.

  7. INSTALL REAR NO. 2 FLOOR BOARD


    1. Install the rear No. 2 floor board.

  8. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

    Click here

  9. ADJUST HEADLIGHT AIMING

    Click here