REAR BUMPER REMOVAL


  1. REMOVE REAR BUMPER PIECE


    1. A003Y13E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook and remove the rear bumper piece.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. REMOVE REAR BUMPER ASSEMBLY


    1. A003VJNE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper assembly.

    2. A003XSN

      Using a clip remover, remove the 8 clips.

    3. Remove the 2 screws.

    4. A003VAO

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A003WYV

      Disengage the 3 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A003WLQ

      Disengage the 4 claws as shown in the illustration.

    7. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the connector.

    8. Remove the rear bumper assembly.