FRONT BUMPER REMOVAL


  1. REMOVE FRONT SPOILER COVER (w/ Front Spoiler)


    1. A003WID

      Remove the 8 screws and front spoiler cover.

  2. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A003ZJQ

      Remove the 9 clips and radiator support opening cover (for 9 Clip Type).

    2. A003XV0

      Remove the 7 clips and radiator support opening cover (for 7 Clip Type).

  3. REMOVE HOOD CENTER CUSHION


    1. A003ZRU

      Remove the 2 hood center cushions.

  4. REMOVE FRONT BUMPER ASSEMBLY


    1. A003VAYE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. A003W34E01

      Using a screwdriver, turn the pins 90 degrees and remove the 2 pin hold clips.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A003XDQE01
      Text in Illustration
      *1 Front Bumper Seal Bracket

      Remove the screw and front bumper seal bracket.

      Note

      Do not pull the front bumper assembly until the front bumper seal bracket is removed, or the front bumper assembly may be damaged.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. A003WT5

      Remove the 6 screws.

    5. A003VHR

      Remove the 2 bolts.

    6. Using a clip remover, remove the 2 clips.

    7. A003VX2

      Disengage the 2 claws.

      Note

      Make sure that the front bumper seal bracket is removed, or the front bumper assembly may be damaged.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. A003ZQO

      Disengage the 2 claws and disconnect the front bumper assembly as shown in the illustration.

    9. w/ Wire Harness:


      1. Disconnect the connector.

    10. w/ Headlight Cleaner System:


      1. A003X8Q

        Disconnect the headlight cleaner hose and drain the washer fluid.

        Tech Tips

        Use a container to collect the washer fluid.

    11. Remove the front bumper assembly.