SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL


  1. REMOVE OUTER MIRROR


    1. Push the upper part of the mirror surface and tilt it.

    2. A003VBKE01
      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover

      Apply protective tape to the areas shown in the illustration.

    3. Using a moulding remover, disengage the 2 claws at the lower part of the outer rear view mirror.

    4. Push the lower part of the mirror surface and tilt it.

    5. A003XZJE01
      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover

      Apply protective tape to the areas shown in the illustration.

    6. Using a moulding remover disengage the 2 claws at the upper part of the outer rear view mirror, and separate the outer mirror.

    7. w/o EC Mirror:


      1. A003ZQV

        Disconnect the 2 connectors and remove the outer mirror.

    8. w/ EC Mirror:


      1. A003YRR

        Disconnect the 3 connectors and remove the outer mirror.

  2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. A003XD2

      Remove the 5 screws.

    2. Disengage the 2 claws and 4 guides, and remove the visor assembly.

    3. A003V4Q

      Disengage the 2 guides and disconnect the outer mirror cover with the side turn signal light assembly.

    4. A003WOE

      Disconnect the connector and remove the outer mirror cover with the side turn signal light assembly.

    5. A003YRV

      Disengage the pin and remove the side turn signal light assembly from the outer mirror cover.