Click here

HEADLIGHT ASSEMBLY (for LED Headlight) REASSEMBLY

Click here
Click here
  1. Click here

    INSTALL HEADLIGHT GASKET


    1. Install a new headlight gasket.

  2. Click here

    INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY


    1. Connect the 2 connectors.

    2. Install the headlight light control ECU sub-assembly with the 4 screws.

  3. Click here

    INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING


    1. Install a new headlight leveling motor base packing.

  4. Click here

    INSTALL HEADLIGHT LEVELING MOTOR


    1. A003YFTE01

      Insert the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

    2. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to engage the shaft.

      Tip:

      Turn the aiming screw the same number of times as it was turned during removal.

    3. A003VPCE01

      Turn the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration.

      Tip:

      When installing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction indicated by the arrow (3) shown in the illustration.

    4. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to install it.

      Tip:

      Turn the aiming screw the same number of times as it was turned during removal.

    5. A003Y5C

      Connect the connector.

  5. Click here

    INSTALL FRONT TURN SIGNAL LIGHT SOCKET AND WIRE


    1. A003X7C

      Connect the connector and install the front turn signal light socket and wire.

  6. Click here

    INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. Install the front turn signal light bulb to the front turn signal light socket and wire.

    2. A003ZMZ

      Turn the front turn signal light bulb and front turn signal light socket and wire in the direction indicated by the arrow shown in the illustration and install them as a unit.

  7. Click here

    INSTALL NO. 1 HEADLIGHT BULB


    1. A003XS1

      Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

      Note:

      Do not touch the bulb glass.

    2. Connect the connector.

  8. Click here

    INSTALL HEADLIGHT LOCKING CAP


    1. A003Z99

      Turn the headlight locking cap in the direction indicated by the arrow shown in the illustration to install it.