Click here

HEADLIGHT ASSEMBLY (for Halogen Headlight) REPAIR

Click here
Click here
Tip:

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

  • If the installation brackets of the headlight assembly are damaged, use the supply retainers for low-cost repair.

  • Ensure that the headlight assembly is not damaged.

Click here
  1. Click here

    INSTALL UPPER HEADLIGHT PROTECTOR RETAINER


    1. A003WA2

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note:

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A003VQI

      Install the upper headlight protector retainer with the 2 screws.

  2. Click here

    INSTALL UPPER NO. 2 HEADLIGHT PROTECTOR RETAINER


    1. A003WVP

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note:

      After cutting off the part, place the upper headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A003Z0Z

      Install the upper No. 2 headlight protector retainer with the 2 screws.

  3. Click here

    INSTALL LOWER NO. 2 HEADLIGHT PROTECTOR RETAINER


    1. A003YVI

      Cut off the part shaded in the illustration and sand smooth with sandpaper.

      Note:

      After cutting off the part, place the lower headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

    2. A003WZS

      Install the lower No. 2 headlight protector retainer with the 2 screws.