HEADLIGHT ASSEMBLY (for Halogen Headlight) REASSEMBLY


  1. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING


    1. Install a new headlight leveling motor base packing.

  2. INSTALL HEADLIGHT LEVELING MOTOR


    1. A003XV6E01

      Insert the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

    2. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to engage the shaft.

      Tech Tips

      Turn the aiming screw the same number of times as it was turned during removal.

    3. A003XMPE01

      Turn the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration.

      Tech Tips

      When installing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction indicated by the arrow (3) shown in the illustration.

    4. Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to install it.

      Tech Tips

      Turn the aiming screw the same number of times as it was turned during removal.

    5. A003VP3

      Connect the connector.

  3. INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. Install the front turn signal light bulb to the front turn signal light socket.

    2. A003VFA

      Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow shown in the illustration and install them as a unit.

  4. INSTALL NO. 2 HEADLIGHT BULB


    1. A003V8M

      Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

      Note

      Do not touch the bulb glass.

  5. INSTALL NO. 1 HEADLIGHT BULB


    1. A003VO1

      Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

      Note

      Do not touch the bulb glass.

    2. Connect the connector.