HEADLIGHT ASSEMBLY (for Halogen Headlight) DISASSEMBLY


  1. REMOVE NO. 1 HEADLIGHT BULB


    1. A003Y4P

      Disconnect the connector.

    2. Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

      Note

      Do not touch the bulb glass.

  2. REMOVE NO. 2 HEADLIGHT BULB


    1. A003VUU

      Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

      Note

      Do not touch the bulb glass.

  3. REMOVE FRONT TURN SIGNAL LIGHT BULB


    1. A003X30

      Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the front turn signal light bulb from the front turn signal light socket.

  4. REMOVE HEADLIGHT LEVELING MOTOR


    1. A003VP3

      Disconnect the connector.

    2. A003XBKE01

      Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

      Tech Tips


      • Turn the aiming screw until the headlight leveling motor can be moved in the direction indicated by the arrow (2) shown in the illustration.

      • Make sure to remember the number of aiming screw rotations.

    3. Turn the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to release it.

      Tech Tips

      When removing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction indicated by the arrow (2) shown in the illustration.

    4. A003ZU5E01

      Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration to disengage the shaft.

      Tech Tips

      Make sure to remember the number of aiming screw rotations.

    5. Pull out the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to remove it.

  5. REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING


    1. Remove the headlight leveling motor base packing.

      Note

      After the headlight leveling motor base packing is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.