CRANKSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CRANK POSITION SENSOR


    1. A003WG8

      Apply a light coat of engine oil to the O-ring on the crank position sensor.

    2. Install the crank position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Connect the crank position sensor connector.

  2. INSPECT FOR ENGINE OIL LEAK


    1. Put the engine in inspection mode Click here.

    2. Start the engine.

    3. Check for engine oil leaks from the connected parts of the oil filter cap and oil filter drain plug.

  3. INSTALL NO. 1 ENGINE UNDER COVER

  4. INSTALL REAR ENGINE UNDER COVER RH