Click here

CRANKSHAFT POSITION SENSOR INSTALLATION

Click here
Click here
  1. Click here

    INSTALL CRANK POSITION SENSOR


    1. A003WG8

      Apply a light coat of engine oil to the O-ring on the crank position sensor.

    2. Install the crank position sensor with the bolt.

      10 N*m 102 kgf*cm 7 ft.*lbf

      Connect the crank position sensor connector.

  2. Click here

    INSPECT FOR ENGINE OIL LEAK


    1. Put the engine in inspection mode (Click here).

    2. Start the engine.

    3. Check for engine oil leaks from the connected parts of the oil filter cap and oil filter drain plug.

  3. Click here

    INSTALL NO. 1 ENGINE UNDER COVER

  4. Click here

    INSTALL REAR ENGINE UNDER COVER RH