Click here

ECM INSTALLATION

Click here
Click here
  1. Click here

    INSTALL ECM


    1. Install the 2 ECM brackets to the ECM with the 4 screws.

    2. Install the ECM with the 2 bolts.

      13 N*m 133 kgf*cm 10 ft.*lbf

    3. Connect the 2 ECM connectors.


      1. A003W4M

        Connect the 2 ECM connectors and lower the 2 levers.

        Note:

        • When connecting the connectors, make sure that dirt, water or other foreign matter does not get caught between the connectors and other parts.

        • Make sure that the 2 levers are securely locked.

      2. Install the wire harness clamp.

  2. Click here

    INSTALL INVERTER RESERVE TANK ASSEMBLY


    1. Install the inverter reserve tank assembly with the 2 bolts.

      10 N*m 102 kgf*cm 7 ft.*lbf
  3. Click here

    INSTALL INVERTER WITH CONVERTER ASSEMBLY

    (Click here)

  4. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

  5. Click here

    INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE


    1. Engage the 4 claws and 2 guides to install the rear floor board upper No. 3 plate.

  6. Click here

    INSTALL DECK FLOOR BOX RH


    1. Engage the 6 guides.

    2. Install the deck floor box RH with the clip.

  7. Click here

    INSTALL REAR NO. 3 FLOOR BOARD


    1. Install the rear No. 3 floor board.

  8. Click here

    INSTALL REAR DECK FLOOR BOX


    1. Install the rear deck floor box.

  9. Click here

    INSTALL REAR NO. 2 FLOOR BOARD


    1. Install the rear No. 2 floor board.

  10. Click here

    PERFORM INITIALIZATION

    Note:

    • Perform Initialization when replacing the ECM (Click here).

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).