ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION


  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR


    1. A003XDYE01
      Text in Illustration
      *a

      Fulcrum Length

      25 mm
      *b

      Fulcrum Length

      180 mm

      Install the engine coolant temperature sensor through a new gasket.

      SST
      09205-76030
      Torque:
      without SST
      20 N*m  { 200 kgf*cm, 14 ft.*lbf }
      with SST
      17 N*m  { 175 kgf*cm, 13 ft.*lbf }

      Note


      • The "with SST" torque value is effective when using SST with a fulcrum length of 25 mm (0.984 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.) Click here.

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

    2. Connect the engine coolant temperature sensor connector.

  2. INSTALL INVERTER RESERVE TANK ASSEMBLY


    1. Install the inverter reserve tank assembly with the 2 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  3. INSTALL FUEL INJECTOR ASSEMBLY

    Click here