Click here

ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL ENGINE COOLANT TEMPERATURE SENSOR


    1. A003XDYE01

      Install the engine coolant temperature sensor through a new gasket.

      Table 1. Text in Illustration
      *a

      Fulcrum Length

      25 mm
      *b

      Fulcrum Length

      180 mm
      09205-76030
      without SST
      20 N*m 200 kgf*cm 14 ft.*lbf
      with SST
      17 N*m 175 kgf*cm 13 ft.*lbf
      Note:

      • The "with SST" torque value is effective when using SST with a fulcrum length of 25 mm (0.984 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.) (Click here).

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

    2. Connect the engine coolant temperature sensor connector.

  2. Click here

    INSTALL INVERTER RESERVE TANK ASSEMBLY


    1. Install the inverter reserve tank assembly with the 2 bolts.

      10 N*m 102 kgf*cm 7 ft.*lbf
  3. Click here

    INSTALL FUEL INJECTOR ASSEMBLY

    (Click here)