| Transaxle fluid pressure | Engine Speed: 1000 rpm | 3 kPa (0.03 kgf/cm2, 0.4 psi) or more |
| Input shaft type T oil seal | 1.0 to 1.8 mm (0.0394 to 0.0709 in.) | |
| Hybrid vehicle transaxle assembly type T oil seal | LH side | -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) |
| RH side | -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) | |
| Shift control actuator seal | 8.5 to 9.8 mm (0.335 to 0.386 in.) | |
| Input shaft assembly end play | 0.10 to 0.20 mm (0.00394 to 0.00787 in.) | |
| No. 1 rear planetary gear assembly | 0.11 to 0.91 mm (0.00433 to 0.0358 in.) | |
| Straight pin | 7.0 to 8.5 mm (0.276 to 0.335 in.) | |
| Differential case sub-assembly (Starting torque) |
New tapered roller bearing | 1.3 to 2.9 N*m (13 to 30 kgf*cm, 12 to 26in.*lbf) |
| Reused tapered roller bearing | 0.9 to 1.3 N*m (9 to 13 kgf*cm, 8 to 12in.*lbf) | |
| Differential case RH shim | ||
| Part No. | Thickness (mm (in.)) | |
| 90564-64031 | 1.70 (0.0669) | |
| 90564-64047 | 1.725 (0.0679) | |
| 90564-64032 | 1.75 (0.0689) | |
| 90564-64048 | 1.775 (0.0699) | |
| 90564-64033 | 1.80 (0.0709) | |
| 90564-64049 | 1.825 (0.0719) | |
| 90564-64034 | 1.85 (0.0728) | |
| 90564-64050 | 1.875 (0.0738) | |
| 90564-64035 | 1.90 (0.0748) | |
| 90564-64051 | 1.925 (0.0758) | |
| 90564-64036 | 1.95 (0.0768) | |
| 90564-64052 | 1.975 (0.0778) | |
| 90564-64037 | 2.00 (0.0787) | |
| 90564-64053 | 2.025 (0.0797) | |
| 90564-64038 | 2.05 (0.0807) | |
| 90564-64054 | 2.075 (0.0817) | |
| 90564-64039 | 2.10 (0.0827) | |
| 90564-64055 | 2.125 (0.0837) | |
| 90564-64040 | 2.15 (0.0846) | |
| 90564-64056 | 2.175 (0.0856) | |
| 90564-64041 | 2.20 (0.0866) | |
| 90564-64057 | 2.225 (0.0876) | |
| 90564-64042 | 2.25 (0.0886) | |
| 90564-64058 | 2.275 (0.0896) | |
| 90564-64043 | 2.30 (0.0906) | |
| 90564-64059 | 2.325 (0.0915) | |
| 90564-64044 | 2.35 (0.0925) | |
| 90564-64060 | 2.375 (0.0935) | |
| 90564-64045 | 2.40 (0.0945) | |
| 90564-64061 | 2.425 (0.0955) | |
| 90564-64046 | 2.45 (0.0965) | |
| Planetary sun gear snap ring | ||
| Part No. | Thickness (mm (in.)) | |
| 90520-31035 | 3.88 (0.153) | |
| 90520-31036 | 3.91 (0.154) | |
| 90520-31037 | 3.94 (0.155) | |
| 90520-31038 | 3.97 (0.156) | |
| 90520-31039 | 4.00 (0.157) | |
| 90520-31040 | 4.03 (0.159) | |
| 90520-31041 | 4.06 (0.160) | |
| 90520-31042 | 4.09 (0.161) | |
| 90520-31043 | 4.12 (0.162) | |
| 90520-31044 | 4.15 (0.163) | |
| 90520-31045 | 4.18 (0.165) | |
| 90520-31046 | 4.21 (0.166) | |
| 90520-31047 | 4.24 (0.167) | |
| 90520-31048 | 4.27 (0.168) | |
| 90520-31049 | 4.30 (0.169) | |
| 90520-31050 | 4.33 (0.170) | |
| 90520-31051 | 4.36 (0.172) | |
| 90520-31052 | 4.39 (0.173) | |
| 90520-31053 | 4.42 (0.174) | |
| 90520-31054 | 4.45 (0.175) | |
| 90520-31055 | 4.48 (0.176) | |
| 90520-31056 | 4.51 (0.178) | |
| 90520-31057 | 4.54 (0.179) | |
| 90520-31058 | 4.57 (0.180) | |
| 90520-31059 | 4.60 (0.181) | |
| 90520-31060 | 4.63 (0.182) | |
| 90520-31061 | 4.66 (0.183) | |
| 90520-31062 | 4.69 (0.185) | |
| 90520-31063 | 4.72 (0.186) | |
| Counter driven gear shim | ||
| Part No. | Thickness (mm (in.)) | |
| 90564-50281 | 2.00 (0.0787) | |
| 90564-50282 | 2.05 (0.0807) | |
| 90564-50283 | 2.10 (0.0827) | |
| 90564-50284 | 2.15 (0.0846) | |
| 90564-50285 | 2.20 (0.0860) | |
| 90564-50286 | 2.25 (0.0886) | |
| 90564-50287 | 2.30 (0.0906) | |
| 90564-50288 | 2.35 (0.0925) | |
| 90564-50289 | 2.40 (0.0945) | |
| 90564-50290 | 2.45 (0.0965) | |
| 90564-50291 | 2.50 (0.0984) | |
| 90564-50292 | 2.55 (0.100) | |
| 90564-50293 | 2.60 (0.102) | |