Click here

THERMOSTAT REMOVAL

Click here
Click here
  1. Click here

    REMOVE RADIATOR SUPPORT OPENING COVER


    1. A003ZJQ

      Remove the 9 clips and radiator support opening cover (for 9 Clip Type).

    2. A003XV0

      Remove the 7 clips and radiator support opening cover (for 7 Clip Type).

  2. Click here

    REMOVE INLET AIR CLEANER ASSEMBLY


    1. A003VRO

      Separate the water hose from the hose clamp.

    2. A003VGC

      Separate the wire harness clamp from the inlet air cleaner assembly.

    3. Remove the 2 bolts, 2 clips and inlet air cleaner assembly.

  3. Click here

    REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Remove the engine oil level dipstick.

    2. A003ZA1

      Remove the 2 bolts, clamp and engine oil level dipstick guide.

    3. Remove the O-ring from the engine oil level dipstick guide.

  4. Click here

    DRAIN COOLANT (for Engine)

    Note:

    Do not remove the reserve tank cap and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. A003Z8O

      Loosen the radiator drain cock plug.

      Tip:

      Collect the coolant in a container and dispose of it according to the local regulations.

    2. A003ZHYE01

      Remove the reserve tank cap and drain the coolant.

      Table 1. Text in Illustration
      *1 Reserve Tank Cap *2 Radiator Drain Cock Plug
  5. Click here

    REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY


    1. A003WNBE01

      Disconnect the No. 2 radiator hose and No. 3 water by-pass hose.

      Table 2. Text in Illustration
      *1 No. 2 Radiator Hose
      *2 No. 3 Water By-pass Hose
      Note:

      • Do not apply force to the water inlet with thermostat sub-assembly when disconnecting the No. 3 water by-pass hose.

      • Do not damage the water inlet with thermostat sub-assembly.

      Tip:

      When disconnecting the No. 3 water by-pass hose, pinch the hose clamp, rotate the hose and pull it straight off the pipe.

    2. A003X31

      Remove the 2 nuts, bolt and water inlet with thermostat sub-assembly.

    3. A003ZHC

      Remove the gasket from the water inlet with thermostat sub-assembly.