WATER PUMP REMOVAL


  1. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A003ZJQ

      Remove the 9 clips and radiator support opening cover (for 9 Clip Type).

    2. A003XV0

      Remove the 7 clips and radiator support opening cover (for 7 Clip Type).

  2. REMOVE INLET AIR CLEANER ASSEMBLY


    1. A003VRO

      Separate the water hose from the hose clamp.

    2. A003VGC

      Separate the wire harness clamp from the inlet air cleaner assembly.

    3. Remove the 2 bolts, 2 clips and inlet air cleaner assembly.

  3. DRAIN COOLANT (for Engine)

    Note

    Do not remove the reserve tank cap and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. A003Z8O

      Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the local regulations.

    2. Remove the reserve tank cap and drain the coolant.

      A003ZHYE01
      Text in Illustration
      *1 Reserve Tank Cap *2 Radiator Drain Cock Plug

  4. REMOVE ENGINE WATER PUMP ASSEMBLY


    1. Disconnect the connector from the engine water pump assembly.

    2. A003XY5

      Remove the 5 bolts and engine water pump assembly from the timing chain cover.

    3. A003W6A

      Remove the gasket from the engine water pump assembly.