EXHAUST PIPE REMOVAL


  1. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    1. A003ZCM

      Remove the 2 bolts and 2 compression springs.

    2. Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.

    3. Remove the gasket from the front exhaust pipe assembly.

  2. REMOVE FRONT NO. 3 ENGINE UNDER COVER


    1. A003X24

      Remove the 4 clips and front No. 3 engine under cover.

  3. REMOVE FRONT CENTER FLOOR BRACE


    1. A003XBU

      Remove the 4 bolts and front center floor brace.

  4. REMOVE HEATED OXYGEN SENSOR


    1. A003ZNH

      Disconnect the heated oxygen sensor connector.

    2. Remove the wire harness bracket.

    3. Remove the bolt and separate the wire harness clamp bracket.

    4. A003VQ4

      Disconnect the wire harness to remove the wire harness clamp bracket.

    5. A003ZOTE04

      Using SST, remove the heated oxygen sensor.

      SST
      09224-00010

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A003X4N

      Remove the 2 bolts and 2 compression springs.

    2. Remove the front exhaust pipe assembly from the 2 exhaust pipe supports.

    3. Remove the gasket from the exhaust manifold.