FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. Check that the float moves smoothly between F and E.

    2. Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.

      A003W9GE01
      Text in Illustration
      *A Type A *B Type B
      *a

      Component without wire harness connected

      (Fuel Sender Gauge Assembly)

      		 - -
      Standard Resistance
      Float Level Type A Type B
      F 13.5 to 16.5 Ω 12.0 to 18.0 Ω
      Between E and F 13.5 to 414.5 Ω (Gradually changes) 12.0 to 415.0 Ω (Gradually changes)
      E 405.5 to 414.5 Ω 405.0 to 415.0 Ω

      If the value is not as specified, replace the fuel sender gauge assembly.