FUEL PUMP REASSEMBLY


  1. INSTALL FUEL PUMP


    1. A003WR4E05
      Text in Illustration
      *1 O-ring
      *2 Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

    2. A003V8L

      Connect the fuel pump harness connector.

    3. A003X75

      Engage the 5 claws of the fuel pump.

      Note


      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

      • Do not remove the suction filter.

    4. A003VYU

      Engage the 2 claws of the No. 1 fuel suction support.

    5. A003VYS

      Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

    6. A003VPW

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      Note

      Do not apply excessive force to the fuel tube or the suction support.

    7. Connect the connector of the fuel pump harness.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A003VHO

      Install the fuel sender gauge assembly by sliding it downward.

    2. Connect the connector of the fuel sender gauge assembly.

    3. Install the 2 harness protectors.

      Note

      Do not damage the wire harness.

    4. Connect the 3 harness clamps.