COMBINATION SWITCH INSTALLATION


  1. INSTALL COMBINATION SWITCH ASSEMBLY


    1. Engage the 2 claws to install the transmission shift main switch.

    2. A003VRN

      Put the 2 guides in position.

    3. Install the position indicator housing assembly to the combination switch assembly with the 2 screws.

      Torque:
      0.8 N*m  { 8 kgf*cm, 7 in.*lbf }

    4. Connect each connector.

    5. Engage the clamp.

    6. Engage the 2 guides and 6 claws to install the combination switch assembly.

  2. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A003X2P

      Turn the shift lever knob clockwise and install the shift lever knob sub-assembly.

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. A003ZMX

      Engage the 12 claws to install the upper console panel sub-assembly.

      Note

      When installing the upper console panel sub-assembly, make sure not to pinch the wire harness connected to the front end of the remote touch (w/ Navigation System).

    4. Close the console compartment door.

  4. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH


    1. Engage the 2 guides, clip and 5 claws to install the upper No. 2 console panel garnish.

  5. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH


    1. Engage the 3 guides, clip and 4 claws to install the upper No. 1 console panel garnish.

  6. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL


    1. A003X7I

      Engage the 4 guides and 7 claws to install the lower center instrument panel finish panel.

    2. Close the glove compartment door.

  7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE


    1. Engage the 4 claws and 2 guides to install the rear floor board upper No. 3 plate.

  9. INSTALL DECK FLOOR BOX RH


    1. Engage the 6 guides.

    2. Install the deck floor box RH with the clip.

  10. INSTALL REAR NO. 3 FLOOR BOARD


    1. Install the rear No. 3 floor board.

  11. INSTALL REAR DECK FLOOR BOX


    1. Install the rear deck floor box.

  12. INSTALL REAR NO. 2 FLOOR BOARD


    1. Install the rear No. 2 floor board.