INSTALL BATTERY COOLING BLOWER ASSEMBLY
Note
Be sure not to touch the fan part of the battery cooling blower assembly.
Do not lift the battery cooling blower assembly using the wire harness.
Install the battery cooling blower assembly with the 2 bolts and nut.
Connect the battery cooling blower assembly connector and clamp.
Connect the 2 wire harness clamps.
INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT
Note
Ensure that the duct is installed securely.
Install the No. 1 hybrid battery intake duct with the 2 clips.
INSTALL REAR FLOOR BOARD SPACER
Install the rear floor board spacer with the 2 clips.
INSTALL REAR SEAT SIDE GARNISH RH
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL REAR DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL REAR SEATBACK ASSEMBLY RH
INSTALL REAR NO. 1 FLOOR BOARD
Engage the 2 claws and 2 clips.
Install the rear No. 1 floor board with the bolt.
INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY
Engage the claw and 2 clips to install the rear No. 2 floor board sub-assembly.
INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY
Engage the 2 claws and 2 clips to install the rear No. 1 floor board sub-assembly.
INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
Install the tonneau cover assembly.
INSTALL DECK FLOOR BOX LH (w/o Woofer)
Engage the 6 guides.
Install the deck floor box LH with the clip.
INSTALL REAR NO. 4 FLOOR BOARD (w/ Woofer)
Engage the 2 clips and 3 guides to install the rear No. 4 floor board.
INSTALL REAR NO. 4 FLOOR BOARD (w/o Woofer)
Install the rear No. 4 floor board.
INSTALL DECK FLOOR BOX RH
Engage the 6 guides.
Install the deck floor box RH with the clip.
INSTALL REAR NO. 3 FLOOR BOARD
Install the rear No. 3 floor board.
INSTALL REAR DECK FLOOR BOX
Install the rear deck floor box.
INSTALL REAR NO. 2 FLOOR BOARD
Install the rear No. 2 floor board.