BATTERY BLOWER REMOVAL


  1. REMOVE REAR NO. 2 FLOOR BOARD


    1. Remove the rear No. 2 floor board.

  2. REMOVE REAR DECK FLOOR BOX


    1. Remove the rear deck floor box.

  3. REMOVE REAR NO. 3 FLOOR BOARD


    1. Remove the rear No. 3 floor board.

  4. REMOVE DECK FLOOR BOX RH


    1. A003Z5J

      Remove the clip.

    2. Disengage the 6 guides and remove the deck floor box RH.

  5. REMOVE REAR NO. 4 FLOOR BOARD (w/o Woofer)


    1. Remove the rear No. 4 floor board.

  6. REMOVE REAR NO. 4 FLOOR BOARD (w/ Woofer)


    1. A003WPK

      Disengage the 2 clips and 3 guides, and remove the rear No. 4 floor board.

  7. REMOVE DECK FLOOR BOX LH (w/o Woofer)


    1. A003WLJ

      Remove the clip.

    2. Disengage the 6 guides and remove the deck floor box LH.

  8. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover assembly.

  9. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY


    1. A003X65

      Disengage the 2 claws and 2 clips, and remove the rear No. 1 floor board sub-assembly.

  10. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY


    1. A003YRO

      Disengage the claw and 2 clips, and remove the rear No. 2 floor board sub-assembly.

  11. REMOVE REAR NO. 1 FLOOR BOARD


    1. A003ZU1

      Remove the bolt.

    2. Disengage the 2 claws and 2 clips, and remove the rear No. 1 floor board.

  12. REMOVE REAR SEATBACK ASSEMBLY RH

    Click here

  13. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  14. REMOVE REAR SEAT SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  15. REMOVE REAR FLOOR BOARD SPACER


    1. A003YK4

      Remove the 2 clips and rear floor board spacer.

  16. REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT


    1. A003V2I

      Remove the 2 clips and No. 1 hybrid battery intake duct.

  17. REMOVE BATTERY COOLING BLOWER ASSEMBLY

    Note


    • Be sure not to touch the fan part of the battery cooling blower assembly.

    • Do not lift the battery cooling blower assembly using the wire harness.


    1. A003W0D

      Disconnect the 2 wire harness clamps.

    2. A003W4U

      Disconnect the battery cooling blower assembly connector and clamp.

    3. A003XZX

      Remove the 2 bolts, nut and battery cooling blower assembly.