INTAKE MANIFOLD REMOVAL


  1. REMOVE THROTTLE BODY ASSEMBLY

    Click here

  2. REMOVE EGR PIPE ASSEMBLY


    1. A003XYD

      Disconnect the 2 wire harness clamps.

    2. A003YI1

      Remove the bolt and wire harness support.

    3. A003YX6

      Remove the 4 bolts, EGR pipe assembly and 2 gaskets.

  3. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR


    1. A003YQK

      Disconnect the connector.

    2. Remove the bolt and manifold absolute pressure sensor.

  4. REMOVE PURGE VSV


    1. A003ZVC

      Disconnect the connector and 2 fuel vapor feed hoses.

    2. A003ZCI

      Remove the bolt and purge VSV.

  5. REMOVE INTAKE MANIFOLD


    1. A003ZLL

      Disconnect the 3 connectors and 2 wire harness clamps.

    2. Remove the engine oil level dipstick.

    3. A003XWA

      Disconnect the wire harness clamp, and then remove the 2 bolts and engine oil level dipstick guide sub-assembly.

    4. Remove the O-ring from the engine oil level dipstick guide sub-assembly.

    5. A003VBE

      Disconnect the fuel vapor feed hose and ventilation hose.

    6. A003VFZ

      Remove the 2 bolts, 2 nuts and intake manifold.

    7. Remove the No. 1 intake manifold to head gasket.

  6. REPLACE STUD BOLT

    Tech Tips

    If a stud bolt is deformed or the threads are damaged, replace it.


    1. A003Y6A

      Using an E6 "TORX" socket wrench, replace the 2 stud bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }