FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A003UCCE02
      Text in Illustration
      *a

      Front view of wire harness connector:

      (to Fuel Sender Gauge Assembly)

      Check that the float moves smoothly between F and E.

    2. Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.

      Standard Resistance
      Float Level Resistance (Ω)
      F 12.0 to 18.0
      Between E and F 12.0 to 415.0 (Gradually changes)
      E 405.0 to 415.0

      • If the value is not as specified, replace the fuel sender gauge assembly.