CRANKSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CRANK POSITION SENSOR


    1. A003TVU

      Apply a light coat of engine oil to the O-ring on the crank position sensor.

    2. Install the crank position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Connect the crank position sensor connector.

  2. INSPECT FOR OIL LEAK

  3. INSTALL NO. 1 ENGINE UNDER COVER

  4. INSTALL REAR ENGINE UNDER COVER RH