CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A003S7G

      Remove the 3 clips and No. 2 cylinder head cover.

      Note


      • Attempting to disengage both front and rear clips at the same time may cause the cover to break.

      • Pull the cover straight up to remove. Attempting to pull the cover forward may cause it to break.

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. A003T6D

      Disconnect the camshaft timing oil control valve assembly connector.

    2. Remove the bolt and camshaft timing oil control valve assembly.

    3. Remove the O-ring from the camshaft timing oil control valve assembly.