FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE REAR ENGINE UNDER COVER RH

  3. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH

    Tech Tips

    Perform the same procedure as for the LH side.

  4. REMOVE CRANKSHAFT PULLEY


    1. A003RYZE02
      Text in Illustration
      *a Hold
      *b Turn

      Using SST, hold the pulley in place and loosen the pulley bolt.

      SST
      09213-58014   ( 91551-80840 )
      09330-00021
    2. A003SPME02
      Text in Illustration
      *a Hold
      *b Turn

      Using SST, remove the crankshaft pulley and pulley bolt.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05021 )

      Tech Tips

      If necessary, remove the pulley and pulley bolt using SST.

  5. REMOVE TIMING CHAIN COVER OIL SEAL


    1. Using a knife, cut off the lip of the oil seal.

    2. A003T6IE03
      Text in Illustration
      *a Cut Position

      Using a screwdriver with its tip wrapped with tape, pry out the oil seal.

      Note

      After removing, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.