PARKING BRAKE LEVER REASSEMBLY


  1. INSTALL PARKING BRAKE SWITCH ASSEMBLY


    1. Install the parking brake switch assembly to the parking brake lever sub-assembly with the screw.

      Torque:
      0.9 N*m  { 9.0 kgf*cm, 7.8 in.*lbf }

  2. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. A003SYV

      Pass the No. 1 parking brake cable assembly through the parking brake lever sub-assembly.

    2. Bend down the parking brake lever claw.

    3. Temporarily install the adjusting nut to the No. 1 parking brake cable assembly.

  3. INSTALL WIRE HARNESS PROTECTOR


    1. Engage the 3 clips to install the 2 wire harness protectors to the parking brake lever sub-assembly.

  4. INSTALL UPPER CONSOLE BOX MOUNTING BRACKET RH


    1. Install the upper console box mounting bracket RH to the parking brake lever sub-assembly with the screw.

  5. INSTALL UPPER CONSOLE BOX MOUNTING BRACKET LH


    1. Install the upper console box mounting bracket LH to the parking brake lever sub-assembly with the screw.