REAR BRAKE DISASSEMBLY


  1. REMOVE REAR DISC BRAKE PISTON


    1. A003RLKE01

      Using SST, remove the rear disc brake piston by turning it counterclockwise.

      SST
      09719-12010   ( 09719-01030 )

      Note


      • Do not damage the piston.

      • Do not allow any brake fluid to spatter.

  2. REMOVE CYLINDER BOOT


    1. Remove the cylinder boot from the rear disc brake piston.

  3. REMOVE PISTON SEAL


    1. A003SMUE05
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the rear disc brake cylinder assembly.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

  4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE REAR DISC BRAKE BLEEDER PLUG