FRONT BRAKE (for 15 inch Front Brake) DISASSEMBLY


  1. REMOVE FRONT DISC BRAKE PISTON


    1. A003RHN

      Place a piece of cloth between the front disc brake piston and disc brake cylinder assembly.

    2. Apply compressed air to remove the front disc brake piston from the disc brake cylinder.

      CAUTION:

      Do not place your fingers in front of the front disc brake piston when using compressed air.

      Note

      Do not spatter the brake fluid.

  2. REMOVE CYLINDER BOOT


    1. A003RW4E03
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the cylinder boot from the disc brake cylinder.

      Note

      Be careful not to damage the cylinder.

  3. REMOVE PISTON SEAL


    1. A003RP8E02
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the disc brake cylinder.

      Note

      Do not damage the inner surface or piston seal groove of the cylinder.

  4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE FRONT DISC BRAKE BLEEDER PLUG