BRAKE PEDAL STROKE SENSOR REMOVAL

Note

While the battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch turns on. Therefore, when servicing the brake system components, do not operate the brake pedal or open/close the doors while the battery is connected.


  1. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

    Click here

  2. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY


    1. A003UVM

      Disconnect the connector from the brake pedal stroke sensor assembly.

    2. A003T5V

      Remove the 2 nuts and brake pedal stroke sensor assembly from the brake pedal support assembly.

      Note


      • Do not drop the brake pedal stroke sensor assembly.

      • If the brake pedal stroke sensor assembly has been dropped, replace the brake pedal stroke sensor assembly with a new one.