YAW RATE AND ACCELERATION SENSOR INSTALLATION

Note


  • Do not damage the yaw rate and acceleration sensor.

  • Make sure that the yaw rate and acceleration sensor is installed securely.

  • Do not use dropped or damaged parts.

  • Keep the contact surfaces of the yaw rate and acceleration sensor and the body free of foreign matter.

  • Make sure that the yaw rate and acceleration sensor is facing the correct direction.

  • Make sure that the yaw rate and acceleration sensor connector is connected securely.


  1. INSTALL YAW RATE AND ACCELERATION SENSOR


    1. Connect the connector to install the yaw rate and acceleration sensor.

  2. INSTALL YAW RATE AND ACCELERATION SENSOR BRACKET


    1. A003TMH

      Insert the claw on the yaw rate and acceleration sensor bracket into the yaw rate and acceleration sensor.

    2. Install the yaw rate and acceleration sensor bracket with the 2 bolts.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  3. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  4. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION

    SST
    09843-18040

    Click here

  5. CHECK FOR YAW RATE AND ACCELERATION SENSOR SIGNAL

    Click here